The Arcast Inc Mini Induction Melter offers the ability to melt, cast and rapidly solidify metal alloys of nominal 1000 gram mass, using an induction ceramic or graphite crucible. It offers the ability to melt and alloy metals at up to 1700 Deg.C. The furnace is enclosed in an open to air copper and stainless housing. Inert gas purging can be used to reduce oxidation of the melt.
The intended use for the Induction Melter is to allow metallurgists and technicians to alloy nonreactive metals and cast them with the least running and capital costs, while maintaining a high engineering standard.
|Capacity:||1000g Nominal||Electrical:||Requires 1 and 3-Phase Power,|
|Crucible/Hearth:||Ceramic Alumina (Std)||208 – 240 VAC, 50/60 Hz|
|Graphite (Optional)||6-15kVA depending on options|
|Chamber:||304 Stainless Steel||Water:||12 lpm below 30 deg. C. @ 5bar|
|Induction Coil:||150kH 5kW||Gas:||Argon or other inert gas|
|Melt Tempurature:||Up to 1700 Deg C.|